Expert roofing services in your area
Roofers in Leona Valley, CA 93532
Everything to Know About Roof Flashings Your Home in Leona Valley, CA
More goes into having a roof installed than just slapping some shingles on top of your home. If you want to keep your possessions protected, you need to have a little extra underneath your shingles. When you’re planning on getting your roof replaced, you should consider roof flashing.
There are several things you should know about roof flashing before you sign up for your new roof: what roof flashing is, the different types of roof flashing, and how long it lasts. Here are some things to know about roof flashing before finding roofers in Leona Valley, CA to install your new roof.
What is Roof Flashing
Roof flashing is a thin, metal material that roofers install to help prevent water from entering your house. It helps to direct water away from your home during a rain or snowstorm. You can usually find roof flashing around areas like chimneys, skylights, or gutters—any part of your roof where your shingles may not lay flush and water can sneak past them.
Some types of metal that make up roof flashing include steel, copper, and aluminum. If you want to keep your home protected from water damage, roof flashings are a necessity. Each roof is different and needs unique care to keep it safe, so you should consider the many types of roof flashing that will protect your Los Angeles County house.
The type of roof flashings include drip edge, step, base, and valley flashing. Finding experienced roofers in Leona Valley, CA will prepare your home for the normal wear and tear that your roof will receive.
Drip Edge Flashing
Drip edge flashings are placed around the edges or eaves of your roof. These types of flashing help to push water down the roof, directing it away from the house to keep it from entering your roof.
You may not think about your gutters often; however, if they become overfilled with debris, they can fill with water and the water can start to seep into your home. Drip edge flashing will help prevent water from passing your shingles into your home when your gutters are overflowing.
For some, chimneys are an essential aspect of your home. If you are the type of person who loves to sit in front of the fire on a cold night with a mug of hot chocolate, you can’t live without your chimney. However, when you have a chimney, you can risk water getting between the cracks in your shingles.
So, if you have a chimney, you need step flashing under your shingles. They are rectangular, bent to 90 degrees, and often stacked on top of each other. This helps to protect your house and make it harder for water to seep through, but also it directs water away from your chimney. Step flashing allows you to enjoy your chimney fire in peace.
Base flashing, also known as apron flashing, is used around the chimney to keep water out of your house. Base flashing is essential if you are putting two layers of flashing on your roof under your shutters. If your Leona Valley, CA roof gets hit with rain often, you should have at least two layers of flashing. With wear and tear from weather, your flashing can move and separate, leaving gaps for water to enter. If you have two layers, they will protect your home from water damage. Your base flashing is the bottom layer with another layer of flashing on the top.
The last type of flashing to ask your Los Angeles County roofers about is valley flashing. Valleys are the areas of the roof where two sections meet, forming an angled dip. If your home is not properly protected around the tip, you can find water entering your home. Valley flashing will keep water from seeping in at the connection point. Shingles quickly erode from the part of your roof, so proper flashing is essential.
Now that you know the types of roof flashing that your Leona Valley, CA roofers can install, you may wonder how long they last.
How Long Does Roof Flashing Last?
How long your roof flashing lasts will depend on the type of shingles that you have. If you have asphalt shingles, it can only last 20 years before needing a replacement. However, if you have a metal roof, you may not have to replace them for over 50 years.
As well, if you take care of your roof, you can extend the life of your roof flashing. For example, if you check on your roof, clean it often, and have any damages repaired, you can make your flashing last longer than your roof shingles.
If you want to protect your Los Angeles County home from water damage, you need to have roof flashing installed under your shingles. When you need a roof replaced and need a new roof flashing, call Roofers99 at 855-206-5994 today. You can also browse our website at https://roofers99.com/ to learn more about what we offer.
Some information about Leona Valley, CA
Leona Valley is a census-designated place located in the geographic Leona Valley of northern Los Angeles County, California, in the transition between the Sierra Pelona Mountains and Mojave Desert, just west of Palmdale and the Antelope Valley. The population was 1,607 at the 2010 census.
Leona Valley’s post colonial history can be best described as land abundant with cattle ranches. In the late 18th century, after the loss of the Tataviam Native Americans – the area’s original inhabitants – to Indian Reductions as Mission Indians at the Mission San Fernando immigrants from Spain and Mexico quickly established themselves. The majority of the immigrants were primarily interested in the land in order to establish cattle ranches. During the 1830s, the ranches were broken up into smaller homesteads by farmers from Germany, France and the state of Nebraska. The Ritter family started one of the first wineries in this country in Leona Valley which was later shut down by the U.S. Prohibition period in the early 20th century.
In 1901 Frank D Hall bought the 3000 acre St. Anthony Ranch. The valley was then known as Leonis and he changed the name of the ranch to Leona Valley Ranch and set about building a dairy farm. The Ranch was most of the land west of Bouquet Canyon Rd.The dairy did not work out and the subdivision of the Leona Valley Ranch started in 1918. That first phase of the subdivision was for properties that had roads and water (either had water or was in an area known to be practical for drilling a well). One of the early sales was the southwest corner of Elizabeth Lake Rd and 90th St West. The Nolenberger’s built a store and gas station on that lot which opened in 1924. The building is now Hemme Hay and Feed store. In 1927 Frank Hall incorporated Farm Home Builders to handle the next phase that required new roads and a water system. To that end Farm Home Builders took out a loan for $45,000. The Great Depression hit before many sold and it wasn’t until the 1940s that most were sold.
The majority of those old large homestead parcels have since been partially subdivided and developed with a mix of custom residences, with Leona Valley still maintaining a spacious beauty.
Directions from Leona Valley, CA to Roofers99
Here are some roofing-related links:
- GAF (General Aniline & Film)
- Asphalt Roofing Manufacturers Association
- NATIONAL ROOFING CONTRACTORS ASSOCIATION
- EDPM Roofing Association